No products in the basket.
Customized Control Panels
P2BPAGNASHGFP- (100)
P2BPAGNASHGFP (100) – Designed for the control and running of two Gnasher 230V grinder pumps with Start/Run capacitors. Offering protection against dry running and motor overload. Suitable for any of the six Gnasher models. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
£824.00
Application Features Of P2BPAGNASHGFP- (100)
– Strong thermoplastic enclosure(IP65) hinged to right hand side and double locks to left.
– Clear thermoplastic front panel.
– Supplied with 4 x wall mounting brackets.
INNER STEEL HINGED LID:
– Yellow Light = Mains On.
– Green Lights = Pumps running.
– Red Lights = Thermal cut-out.
– Lockable Door Interlocking Isolator:
– Isolates power supply when lid is open.
– Two Hand-Off-Auto Switches.
– Audible alarm buzzer – illuminated
– Alarm on/off switch
INTERNALS:
– 50VA Transformer: To reduce 230V to 24Vac for level control.
– Relay: For level controls.
– Two Contactors with Motor Overload:
– Manual setting for pump running Amps.
– Will stop pump when value is exceeded.
– Fuses: Fuse holders with HRC fuses on mains and auxiliary circuits.
– Start/Run Capacitors: 85µF Start and 35µF Run capacitors with switch relay.
Based on 0 reviews
Be the first to review “P2BPAGNASHGFP- (100)”
Related products
- Customized Control Panels, Pumps Control Panels
QMBT BOX-05
QMBT BOX-05 Designed for the control of 230/1/50 pumps in clean water applications such as boreholes, wells and sumps; offering protection against dry running and motor overload. Five models cover motor sizes up to a nominal 1.5kW, min 2.4 to max 12 Amps.
SKU: n/a - Customized Control Panels
P2BPTA2P – (48)
P2BPTA2P (48) – Designed for the control and running of two 400V 3-phase pumps, offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 1.2 to 13. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a - Customized Control Panels
P2BPTA2L- (62)
P2BPTA2L (62) – Designed for the control and running of two 400V 3-phase pumps, offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 1.2 to 13. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a - Customized Control Panels
P2BPAGNASHL-(113)
P2BPAGNASHL (113) – Designed for the control and running of a Gnasher 230V grinder pump with Start/Run capacitors. Offering protection against dry running and motor overload. Suitable for any of the six Gnasher models. Typically used with three float switches for Stop, Start and High Level Alarm.
SKU: n/a - Customized Control Panels
P2BPAGFP -(59)
P2BPAGFP (59) – Designed for the control and running of a 230V single phase pump, offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 2.5 to 13. Typically used with three float switches for Stop, Start and High Level Alarm.
SKU: n/a
There are no reviews yet.