Shop Categories
-
Water Pumps (111)
-
Agricultural Pumps (18)
-
Borehole Pumps (34)
-
Chopper pumps (3)
-
Grinder Pumps (21)
-
Cutter Pumps (4)
-
Drainage Pumps (82)
-
Float Switches (16)
-
Franklin single phase motors (22)
-
Irrigation Pumps (30)
-
Jet Pumps (10)
-
Landfill Site Pumps & accessories (10)
-
Macerator pumps (2)
-
Motors (2)
-
Multistage Pumps (60)
-
Pressure Boosting Pumps (17)
-
Pump Accessories (66)
-
Pumps Control Panels (55)
-
Self-Priming Pumps (72)
-
Sewage Pumps (79)
-
Sludge Pumps (4)
-
Well Pumps (17)
-
Waste water (4)
Shop
Showing 1–15 of 523 results
- Self-Priming Pumps
TELLARINI AL20
Tellarini AL20 Stainless Liquid Ring Transfer Self priming liquid ring transfer pumps, suitable for a wide range of clean liquids and corrosive duties.the possibility to operate with discontinuous presence of the liquid at the suction and the reversibility of the flow.The AL series, entirely made of stainless steel AISI 316, is particularly suited for corrosive liquids (chemical agents, fertilizing fluids, sea water) and food fluids (milk, wine, oil, fruit juices).On request they can be equipped with a manual by-pass to regulate capacity and head.They are used in oenology, food and chemical industry, agriculture.
SKU: n/a - Drainage Pumps
SRT Series Electrical Submersible Pump
SRT Series Electric Submersible Pumps for use in 6″ wells. The SRT series pumps are designed to pump water from reservoirs, collecting tanks and wells, to pressurize civil, agricultural, industrial and fire-fighting plants and for irrigation.
SKU: SRT Electrical - Irrigation Pumps, Pressure Boosting Pumps
HM Multistage Pump for irrigation
This horizontal centrifugal self-priming electric pumps with inox impellers is the perfect product for domestic and garden application. This pump features inox impellers; it is available with single-phase 230V-50HZ (thermal protection included) or three-phase 230/400V-50Hz. This product is designed for working in clean water, without solids or abrasive substances, non-aggressive, non-viscous, and chemically neutral.
SKU: HM Multistage - Customized Control Panels
P2BPA2GNASHGFP- (95)
P2BPA2GNASHGFP (95) – Designed for the control and running of two Gnasher 230V grinder pumps with Start/Run capacitors. Offering protection against dry running and motor overload. Suitable for any of the six Gnasher models. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a - Customized Control Panels
QMBT Control BOX- 035
QMBT BOX- 035 Designed for the control of 230/1/50 pumps in clean water applications such as boreholes, wells and sumps; offering protection against dry running and motor overload. Five models cover motor sizes up to a nominal 1.5kW, min 2.4 to max 12 Amps.
SKU: n/a - Automatic Pressure Boosting Pumps
AUTOMINI ALM 20 STAINLESS
The booster unit with electronic automatic switch may be used instead of the traditional water supply system
made of pressure switch and pressure tank with many advantages in terms of volume and weights.The electronic switch test changes in pressure rate in the water system and automatically react starting or stopping the electric pump; includes also the dry running protection which avoid damages due to use of the electric
pump without water.SKU: AutominiAlm20 - Jet Pumps, Self-Priming Pumps
TELLARINI ECC24JET-24V
Strands ECC JET series self-priming water pumps. For suction and transfer of drinking or clean water from the tank, as well as air dissolved in the liquid, if any. AISI 304 stainless steel body and shaft. 12 or 24 Volt DC motor with terminal box, IP23 protection. Self-priming to a depth of 8 meters. Maximum 60 ºC liquid transfer can be done. Maximum working pressure 6 bar.
SKU: n/a - Self-Priming Pumps
TELLARINI KIT 1020A – 12V
Tellarini Diesel Transfer Kits Bronze self priming liquid ring diesel transfer kits, complete with suction and delivery hoses, suction filter and dispenser gun. 12/24Vdc and 230V options. DC models have Heads to 15m and flows to 25 l/m, 230V model has Heads to 29m and flows to 27 l/m.
SKU: n/a - Waste water, Water Pumps
SIGMA 50 GFLU – 230/400V
Available as auto or manual versions in 400V three phase and 110V or 230V single phase, the Sigma 50-GFLU submersible pump has been designed for arduous sludge and waste water type applications, without fibrous material. It features a twin vane scroll type impeller providing a 20mm dia. solids handling capability (max. density = 1050kg/m³).
SKU: n/a - Waste water, Water Pumps
Sigma 50 GFLU – 110V
Available as auto or manual versions in 400V three phase and 110V or 230V single phase, the Sigma 50-GFLU submersible pump has been designed for arduous sludge and waste water type applications, without fibrous material. It features a twin vane scroll type impeller providing a 20mm dia. solids handling capability (max. density = 1050kg/m³).
SKU: n/a