What a drainage pump is?
Drainage pumps are used to quickly drain or pump large amounts of water from one place to another.
A drainage pump is a submersible pump with a built-in float switch that automatically cuts the power to the pump when there is no water left to pump. They used for pumping out water that is being drained into a sump.
What does it do?
A drainage pump should always be able to pump dirty water – this means water containing grit, sand, mud and small pebbles.
Accessories or related products you may need
In order to command the drainage pump, it’s always best to fit it with a controller, normally a plastic or rubber floater that automatically switches on and off as the water rises and falls.
We also recommend fitting a good removable cover over the sump pit for easy access to the drainage pump and to stop any person from falling into the sump.
Different Types
There are many different drainage pumps in the market, domestic pump, agricultural and industrial pumps. Some drainage pump cannot handle any solids, some other (Grinder pumps) can handle solids and dirty water. Submersible drainage pumps can pump water at various speeds, depending if they are connected to an inverter or not and of course it always depends on the size of the motor.
Domestic use
In domestic use, these pumps can drain flooded basements, empty swimming pools, tackle waterlogged areas of a garden. They are very flexible in their use. Usually they are equipped of single phase motor and much cheaper
Are maintenance free and are very easy to install.
Industrial use of drainage pumps
In industrial use, drainage pumps have open multi-channel impellers and multi uses, too.
You can use them for draining soiled water; others are good at effluent drainage, draining wells and to stand in areas that are prone to flooding.
Their drainage motor is usually three phase. Ti gives (usually) a greater starting torque and it is used a lot need when handling solids.
Buy our products and you get also our professional support
Peel Pumps carry a very large stock ready for next day deliveries, it can provide the full service, including fittings, pressure tank, press control and many other products.
For more information or advise, do not hesitate to contact PEEL Pumps at 01706 558352 or write to [email protected]
Drainage Pumps
Showing 1–35 of 79 results
-
Drainage Pumps, Heavy Duty Pumps
EVAK STAINOX 5.10 230v 400V
STAINOX 5.10-230/400V the cast 316 stainless steel Stainox submersible pump has been designed for arduous contaminated water and sewage type applications. It features a vortex impeller providing a 35mm dia. solids handling capability.
SKU: n/a -
-
-
-
-
-
Drainage Pumps
ARVEN REGAL Sump Pump 150 -230/400V
ARVEN REGAL 150 -230/400V stainless steel drainage pumps are designed for handling clean and dirty water.Regal is a range of submersible drainage pumps for domestic, agricultural and industrial uses as well as for technological, purely professional use.
SKU: ArvenR150-230v -
Drainage Pumps
SEALAND YACHIT MAXI 12/24V
The bilge pumps of the series “YACHT” are entirely manufactured in special crash,rust and hydrocarbons proof polypropylene.Very easy to be cleaned and installed, this pump is supplied with 1 meter cable, fastening bottom cover and instruction manual for correct use.
SKU: n/a -
Heavy Duty Pumps
Evak AGIVORT 5.20 – 230/400V
Agivort submersible agitator pumps are designed for arduous slurry handling applications. Available in 230/1/50 Auto and 400/3/50, they are constructed primarily from FC200 cast iron with heavy grade 304 stainless steel motor housing.
SKU: EvakAgitator5.20 -
Drainage Pumps
DK drainage pump and drain pump for waste water
The DK drainage pump has been designed for the drainage of wastewater. This drain pump is suitable for dirty water with particles of max diameter of 35mm. It is provided with single-phase motor or with three phase motor entirely made in copper for a better conductivity and working temperature. The motor shaft is in stainless still 316 and the vortex impeller is in cast iron. Thanks to its Mechanical seal in Graphite e Ceramic, this drain pump is designed for long lasting in heavy duty.
SKU: DK -
Drainage Pumps
EVAK RESIDOX 110V/230V
EVAK RESIDOX stainless steel puddle sucker pump designed to pump down to 1mm. Features a highly abrasion resistant Hytrel vortex impeller to reduce wear and maintain reliability. 0.4kW motor with auto reset thermal protector. 2″ discharge, Heads to 11m and flows to 220 l/m.
SKU: EvakResidox110v -
Heavy Duty Pumps, Self-Priming Pumps, Water Pumps
GMP B4KQ-A 400V Self Priming heavy duty pump
GMP Series BKQ/A Self priming heavy duty water pumps. Available in 230V sizes 1″ to 3″ and 400V sizes 1½” to 4″ these pumps are suitable for a wide range of clean or dirty water applications. Single phase Heads to 19m and flows to 825 l/m, 3 phase Heads to 19m and flows to 1650 l/m.
SKU: n/a -
Drainage Pumps, Heavy Duty Pumps, Water Pumps
MAXI HP – 400V
The 400/3/50 Maxi HP submersible has a hard faced impeller and volute designed for handling abrasive pumped media with density to max. 1.2kg/dm³. It can handle solids in suspension up to 40mm dia. at temperatures up to 40°C.
SKU: GrindexMaxiHp -
Drainage Pumps, Heavy Duty Pumps, Sewage Pumps
MAXI H X 400V Freestanding
The Maxi HX 400V submersible is designed for heavy duty waste water and drainage applications, with
pumped media containing solids in suspension up to 80mm dia at temperatures up to 40°C. It features a channel impeller designed for high hydraulic efficiency mounted on a reduced length shaft.SKU: MaxiHX400 -
Heavy Duty Pumps, Sewage Pumps
MAXI HRNN-400V Freestanding
The Maxi HRNN 400V submersible is designed for heavy duty applications with pumped media containing solids in suspension up to 78mm dia at temperatures up to 40°C and densities to 1.2kg/dm³. It features a single channel impeller designed for high hydraulic efficiency mounted on a reduced length shaft.
SKU: n/a -
Heavy Duty Pumps, Sewage Pumps
MAXI HG-400V Freestanding
The MAXI HG-400V Freestanding submersible is designed for heavy duty applications with screened waste or drainage water containing solids in suspension up to 80mm dia at temperatures up to 40°C. It features a double channel impeller designed for high hydraulic efficiency mounted on a reduced length shaft.
SKU: MAXI HG-400V -
Heavy Duty Pumps, Sewage Pumps
MAXI HON-400V Freestanding
The MAXI HON-400V Freestanding submersible is designed for heavy duty applications with screened waste or drainage water containing solids in suspension up to 78mm dia at temperatures up to 40°C. It features a single channel impeller designed for high hydraulic efficiency mounted on a reduced length shaft.
SKU: Maxi HON-400V -
Heavy Duty Pumps, Sewage Pumps
MAXI HC-400V
The MAXI HC-400V submersible is designed for heavy duty applications with pumped media containing solids in suspension up to 76mm dia at temperatures up to 40°C and densities to 1.2kg/dm³.It features a single channel impeller designed for high hydraulic efficiency mounted on a reduced length shaft.
SKU: n/a -
Heavy Duty Pumps, Sewage Pumps
Evak HIPPO DN 80-200 230V Freestanding
The Evak Hippo DN80 submersible sewage pump is a 3-inch full free passage pump with a recessed vortex impeller designed for heavy-duty applications with soiled biological waste waters, sewage and rainwater, for either domestic or commercial use.The Hippo Series has a 3 inch (80mm) solid free-passage pump volute, with flanged connection to allow the pumps to be fitted with a claw for use on guide rail systems.The motor housing is made from Stainless Steel and features an EKK Eagle Burgmann double mechanical seal and thermal protection (single phase).
SKU: n/a -
Drainage Pumps, Sewage Pumps
Evak HIPPO 80-150 230V Freestanding
The Evak Hippo DN80 submersible sewage pump is a 3-inch full free passage pump with a recessed vortex impeller designed for heavy-duty applications with soiled biological waste waters, sewage and rainwater, for either domestic or commercial use.The Hippo Series has a 3 inch (80mm) solid free-passage pump volute, with flanged connection to allow the pumps to be fitted with a claw for use on guide rail systems.The motor housing is made from Stainless Steel and features an EKK Eagle Burgmann double mechanical seal and thermal protection (single phase).
SKU: n/a -
Drainage Pumps, Heavy Duty Pumps, Water Pumps
AGIVORT 5.50 – 400V
Agivort submersible agitator pumps are designed for arduous slurry handling applications. Available in 230/1/50 Auto and 400/3/50, they are constructed primarily from FC200 cast iron with heavy grade 304 stainless steel motor housing.
SKU: Agivort5.50 -
Heavy Duty Pumps
Evak Agivort 5.10 Slurry Pump – 230/400V
Agivort submersible agitator pumps are designed for arduous slurry handling applications. Available in 230/1/50 Auto and 400/3/50, they are constructed primarily from FC200 cast iron with heavy grade 304 stainless steel motor housing.
SKU: Agivort5.10 -
-
-
Drainage Pumps, Heavy Duty Pumps, Sludge Pumps, Waste water, Water Pumps
SIGMA KDFU-125 400V Drainage and Waste water pump
Drainage Pumps, Heavy Duty Pumps, Sludge Pumps, Waste water, Water PumpsSIGMA KDFU-125 400V Drainage and Waste water pump
Submersible sludge pump of proven construction designed for pumping water contaminated by the content of mud, clay, sand, crushed stone and similar materials of abrasive effect with a total proportion of impurities of max. 30% by weight. The pump can be used especially in construction, excavation and amelioration work, in the removal of floods, etc.
SKU: n/a -
Drainage Pumps, Heavy Duty Pumps, Sludge Pumps, Water Pumps
SIGMA KDFU-100 400V
Submersible sludge pump of proven construction designed for pumping water contaminated by the content of mud, clay, sand, crushed stone and similar materials of abrasive effect with a total proportion of impurities of max. 30% by weight. The pump can be used especially in construction, excavation and amelioration work, in the removal of floods, etc.
SKU: n/a -
Drainage Pumps, Heavy Duty Pumps, Sludge Pumps, Water Pumps
SIGMA KDFU-80-150 400V Sludge Pump
Submersible sludge pump of proven construction designed for pumping water contaminated by the content of mud, clay, sand, crushed stone and similar materials of abrasive effect with a total proportion of impurities of max. 30% by weight. The pump can be used especially in construction, excavation and amelioration work, in the removal of floods, etc.
SKU: n/a