ZDS 230v 4″ Complete Solution – Technopolymer Submersible Pump
Every ZDS 230v 4″ complete solution submersible pump unit of the series has been designed and tested to ensure smooth and trouble-free running for years. That is not to say that you will automatically have a satisfactory supply of water if you install the pump. The actual water pumped will also depend on other factors, such as how much water the well has.
Series submersible pumps are unique in its class, therefore protects them from virtually any conceivable problem. Therefore, if you have problems with your water supply, be sure to check thoroughly the complete installation, as it is very likely that the problem does not lie with the pump. For example, the water level of the well or a tank may be minimal, a pipe may be obstructed, a pipe fixture could be leaking or there may be problems with the power supply. Technopolymer submersible pump
Quality in the well with this Technoplymer submersible pump
The O2 motors are ZDS single-phase, oil-cooled and are suitable for 4” wells and larger.
- 0.25 – 2.2 kW;
- 220 – 240v / 50Hz;
- Voltage tolerence: +6% / -10%;
- Thrust: 1.500N; 2.500N; 4.500N;
- 4″ NEMA standard dimensions;
- Motor for permanent split capacitor.
Submersible Pump Specification
- Degree of protection: IP68;
- Insulation: CI.F;
- Allowed working PH of water: 6,4-8,0;
- Rated Ambient temp: max 40oC;
- Maximum Immersion Depth: 150m;
- Cooling Flow: min 8 cm/sec;
- Starts/h: 150;
- Mounting: vertical/horizontal;
- Supplied with 1.5m of cable.
This solution is supplied with a technopolymer hydraulic part as standard. This product is available with or without DRP. The DRP is an electronic device that guarantees optimal protection of the pump against dry-running and also other possible installation faults or operation failures.
If you require any technical assistance then please contact a member of our team on 01706 558 352 or [email protected]. We will endeavour to respond to you as quickly as possible.