, ,

ZDS QPGO 230v Complete Solution – Technopolymer 4″ Submersible Pump

4″ single-phase submersible pump with start and run capacitor integrated in the oil-cooled motor available with or without DRP device. These complete solutions are manufactured to ISO 9001 standards. The 02 motor does not require a start and run control box as the capacitor is built into it. This complete solution is designed to be used in applications such as lifting, distribution and pressurisation in civil and industrial water systems, garden irrigation systems, filling of pressure vessels and tanks, fire-fighting systems, washing systems, drainage systems and fountain supply.

ZDS Pumps Innovation Submersible Pumps Official Reseller UK



ZDS QPGO 230v Complete Solution – Technopolymer 4″ Submersible Pump

Every ZDS 230v 4″ complete solution submersible pump unit of the series has been designed and tested to ensure smooth and trouble-free running for years. That is not to say that you will automatically have a satisfactory supply of water if you install the pump. The actual water pumped will also depend on other factors, such as how much water the well has.

Series submersible pumps are unique in its class, therefore protects them from virtually any conceivable problem. Therefore, if you have problems with your water supply, be sure to check thoroughly the complete installation, as it is very likely that the problem does not lie with the pump. For example, the water level of the well or a tank may be minimal, a pipe may be obstructed, a pipe fixture could be leaking or there may be problems with the power supply. Technopolymer submersible pump

Quality in the well with this Technoplymer submersible pump

The O2 motors are ZDS single-phase, oil-cooled and are suitable for 4” wells and larger.

  • 0.25 – 2.2 kW;
  • 220 – 240v / 50Hz;
  • Voltage tolerence: 6% / -10%;
  • Thrust: 1.500N; 2.500N; 4.500N;
  • 4″ NEMA standard dimensions;
  • Motor for permanent split capacitor.

Submersible Pump Specification

  • Degree of protection: IP68;
  • Insulation: CI.F;
  • Allowed working PH of water: 6,4-8,0;
  • Rated Ambient temp: max 40oC;
  • Maximum Immersion Depth: 150m;
  • Cooling Flow: min 8 cm/sec;
  • Starts/h: 150;
  • Mounting: vertical/horizontal;
  • Supplied with 1.5m of cable.

This solution is supplied with a technopolymer hydraulic part as standard. This product is available with or without DRP. The DRP is an electronic device that guarantees optimal protection of the pump against dry-running and also other possible installation faults or operation failures.

If you require any technical assistance then please contact a member of our team on 01706 558 352 or sales@peelpumps.co.uk. We will endeavour to respond to you as quickly as possible.

ModelVoltagekWMax. FlowMax. Head
QPGO.P.1-8 230v 0.25 kW 1.5 m3/h 50.2 m
QPGO.P.1-8 (DRP included) 230v 0.25 kW 1.5 m3/h 50.2 m
QPGO.P.1-12 230v 0.37 kW 1.5 m3/h 75.4 m
QPGO.P.1-12 (DRP included) 230v 0.37 kW 1.5 m3/h 75.4 m
QPGO.P.1-18 230v 0.55 kW 1.5 m3/h 113 m
QPGO.P.1-18 (DRP included) 230v 0.55 kW 1.5 m3/h 113 m
QPGO.P.1-25 230v 0.75 kW 1.5 m3/h 157 m
QPGO.P.1-25 (DRP included) 230v 0.75 kW 1.5 m3/h 157 m
QPGO.P.2-5 230v 0.25 kW 2.4 m3/h 32 m
QPGO.P.2-5 (DRP included) 230v 0.25 kW 2.4 m3/h 32 m
QPGO.P.2-8 230v 0.37 kW 2.4 m3/h 51.2 m
QPGO.P.2-8 (DRP included) 230v 0.37 kW 2.4 m3/h 51.2 m
QPGO.P.2-12 230v 0.55 kW 2.4 m3/h 76.8 m
QPGO.P.2-12 (DRP included) 230v 0.55 kW 2.4 m3/h 76.8 m
QPGO.P.2-16 230v 0.75 kW 2.4 m3/h 102.4 m
QPGO.P.2-16 (DRP included) 230v 0.75 kW 2.4 m3/h 102.4 m
QPGO.P.2-24 230v 1.1 kW 2.4 m3/h 153.6 m
QPGO.P.2-24 (DRP included) 230v 1.1 kW 2.4 m3/h 153.6 m
QPGO.P.3-6 230v 0.37 kW 4.2 m3/h 33.3 m
QPGO.P.3-6 (DRP included) 230v 0.37 kW 4.2 m3/h 33.3 m
QPGO.P.3-9 230v 0.55 kW 4.2 m3/h 50 m
QPGO.P.3-9 (DRP included) 230v 0.55 kW 4.2 m3/h 50 m
QPGO.P.3-13 230v 0.75 kW 4.2 m3/h 72.2 m
QPGO.P.3-13 (DRP included) 230v 0.75 kW 4.2 m3/h 72.2 m
QPGO.P.3-19 230v 1.1 kW 4.2 m3/h 105.5 m
QPGO.P.3-19 (DRP included) 230v 1.1 kW 4.2 m3/h 105.5 m
QPGO.P.5-4 230v 0.37 kW 6 m3/h 24.5 m
QPGO.P.5-4 (DRP included) 230v 0.37 kW 6 m3/h 24.5 m
QPGO.P.5-6 230v 0.55 kW 6 m3/h 36.8 m
QPGO.P.5-6 (DRP included) 230v 0.55 kW 6 m3/h 36.8 m
QPGO.P.5-8 230v 0.75 kW 6 m3/h 49.1 m
QPGO.P.5-8 (DRP included) 230v 0.75 kW 6 m3/h 49.1 m
QPGO.P.5-13 230v 1.10 kW 6 m3/h 79.7 m
QPGO.P.5-13 (DRP included) 230v 1.10 kW 6 m3/h 79.7 m
Weight N/A
Complete Solution - Tech

QPGO.P.1-12, QPGO.P.1-12 DRP, QPGO.P.1-18, QPGO.P.1-18 DRP, QPGO.P.1-25, QPGO.P.1-25 DRP, QPGO.P.1-8, QPGO.P.1-8 DRP, QPGO.P.2-12, QPGO.P.2-12 DRP, QPGO.P.2-16, QPGO.P.2-16 DRP, QPGO.P.2-24, QPGO.P.2-24 DRP, QPGO.P.2-5, QPGO.P.2-5 DRP, QPGO.P.2-8, QPGO.P.2-8 DRP, QPGO.P.3-13, QPGO.P.3-13 DRP, QPGO.P.3-19, QPGO.P.3-19 DRP, QPGO.P.3-6, QPGO.P.3-6 DRP, QPGO.P.3-9, QPGO.P.3-9 DRP, QPGO.P.5-13, QPGO.P.5-13 DRP, QPGO.P.5-4, QPGO.P.5-4 DRP, QPGO.P.5-6, QPGO.P.5-6 DRP, QPGO.P.5-8, QPGO.P.5-8 DRP

DatasheetPDF download datasheet manual

Based on 0 reviews

0.0 overall

Be the first to review “ZDS QPGO 230v Complete Solution – Technopolymer 4″ Submersible Pump”

There are no reviews yet.