P2BPTABAKHOL- (102)
P2BPTABAKHOL (102) – Designed for the control and running of a 400V three phase pump up to 18 Amp. Offering protection against dry running and motor overload. Pre-wired for Klixon, Water-in-Oil Probe and Hour Counter. Typically used with three float switches for Stop, Start and High Level Alarm.
£765.60
Application Features Of P2BPTABAKHOL- (102)
– Sheet steel box with double hinge to left hand side and key lock to right.
– 4 x wall mounting brackets.
– IP55 enclosure.
LID:
– Amber Light = Mains supply.
– Green Light = Pump running.
– Red Lights = Pump alarm functions.
– Door Interlocking Isolator: Isolates the power supply when lid is open.
– Hand-Off-Auto Switch.
– Audible alarm buzzer.
– Alarm on/off switch.
– Pump Run Hour Counter.
INTERNALS:
– 50VA Transformer: To reduce 400V supply to 24Vac for level control.
– Plug-In Relay: For level controls.
– Pre-wired with Klixon switch.
– Pre-wired for Oil-in-Water Probe Contactor with Overload: Manual setting for pump running Amps.
– Fuses: Fuse holders with HRC fuses on mains and auxiliary circuits.
Based on 0 reviews
Be the first to review “P2BPTABAKHOL- (102)” Cancel reply
Related products
- Customized Control Panels
P2BPTA2L – (62)
0 out of 5(0)P2BPTA2L (62) – Designed for the control and running of two 400V 3-phase pumps, offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 1.2 to 13. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a - Customized Control Panels
P2BPTA2P – (48)
0 out of 5(0)P2BPTA2P (48) – Designed for the control and running of two 400V 3-phase pumps, offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 1.2 to 13. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a - Customized Control Panels
P2BPTA2BAKHOL- (101)
0 out of 5(0)P2BPTA2BAKHOL (101) – Designed for the control and running of two 400V three phase pumps up to 18 Amp. Offering protection against dry running and motor overload. Pre-wired for Klixons, Water-in-Oil Probes and Hour Counters. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm
SKU: n/a - Customized Control Panels
QMBT BOX- 15
0 out of 5(0)QMBT BOX-15 Designed for the control of 230/1/50 pumps in clean water applications such as boreholes, wells and sumps; offering protection against dry running and motor overload. Five models cover motor sizes up to a nominal 1.5kW, min 2.4 to max 12 Amps.
SKU: n/a - Customized Control Panels
QMBT BOX-10
0 out of 5(0)QMBT BOX-10 Designed for the control of 230/1/50 pumps in clean water applications such as boreholes, wells and sumps; offering protection against dry running and motor overload. Five models cover motor sizes up to a nominal 1.5kW, min 2.4 to max 12 Amps.
SKU: n/a
There are no reviews yet.