P2BPTABALKO- (66)
P2BPTABALKO (66) – Designed for the control and running of a 400V three phase pump up to 25 Amp. Offering protection against dry running and motor overload. Pre-wired for Klixon and Water-in-Oil Probe. Typically used with three float switches for Stop, Start and High Level Alarm.
£679.00
Application Features Of P2BPTABALKO- (66)
– Sheet steel box with double hinge to right hand side and twin locks to left.
– 4 x wall mounting brackets. IP55 enclosure.
LID:
– Yellow Light = Mains supply.
– Green Light = Pump running.
– Upper Red Light = High level alarm.
– Lower Red Light = Thermal cut-out.
– Door Interlocking Isolator: Isolates the power supply when lid is open.
– Hand-Off-Auto Switch.
– High powered IP65 Siren alarm.
– Alarm on/off switch.
INTERNALS:
– 50VA Transformer: To reduce 400V supply to 24Vac for level control.
– Plug-In Relay: For level controls.
– Pre-wired with Klixon relay.
– Pre-wired with water-in-oil probe relay.
– Contactor with Overload: Manual setting for pump running Amps.
– Fuses: Fuse holders with HRC fuses on mains and auxiliary circuits.
Based on 0 reviews
Be the first to review “P2BPTABALKO- (66)”
Related products
-
Customized Control Panels
P2BPTAL-(60)
P2BPTAL (60) – Designed for the control and running of a 400V 3-phase pump, offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 1.2 to 13. Typically used with three float switches for Stop, Start and High Level Alarm.
SKU: n/a -
Customized Control Panels
QMBT Control BOX-20
QMBT BOX-15 Designed for the control of 230/1/50 pumps in clean water applications such as boreholes, wells and sumps; offering protection against dry running and motor overload. Five models cover motor sizes up to a nominal 1.5kW, min 2.4 to max 12 Amps.
SKU: n/a -
Customized Control Panels
P2BPA2L-(69)
P2BPA2L (69) – Designed for the control and running of a two 230V single phase pumps, offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 2.5 to 13. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a -
Customized Control Panels
P2BPTA2L- (62)
P2BPTA2L (62) – Designed for the control and running of two 400V 3-phase pumps, offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 1.2 to 13. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a -
Customized Control Panels
P2BPACP -(54)
P2BPACP (54) – Designed for the control and running of a 230V single phase pump, with 15 minute increment 24 hour timer. Offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 2.5 to 13. Typically used with three float switches for Stop, Start and High Level Alarm.
SKU: n/a
There are no reviews yet.