No products in the basket.
Customized Control Panels
P2BPTABBALKO -(85)
P2BPTABBALKO (85) – Designed for the control and running of a 400V three phase pump up to 50 Amp. Offering protection against dry running and motor overload. Pre-wired for Klixon and Water-in-Oil Probe. Typically used with three float switches for Stop, Start and High Level Alarm.
£948.30
Application Features Of P2BPTABBALKO -(85)
– Sheet steel box with double hinge to left hand side and key lock to right.
– 4 x wall mounting brackets.
– IP55 enclosure.
LID:
– Yellow Light = Mains supply.
– Green Light = Pump running.
– Right Red Light = High level alarm.
– Left Red Light = Thermal cut-out.
– Door Interlocking Isolator: Isolates the power supply when lid is open.
– Hand-Off-Auto Switch.
– High powered IP65 Siren alarm.
– Alarm on/off switch.
INTERNALS:
– 100VA Transformer: To reduce 400V supply to 24Vac for level control.
– Plug-In Relay: For level controls.
– Pre-wired with Klixon relay.
– Pre-wired with water-in-oil probe relay.
– Contactor with Overload: Manual setting for pump running Amps.
– Fuses: Fuse holders with HRC fuses on mains and auxiliary circuits.
Brand
BBC Pumps
BBC Pumps UK dealer. Selling and Installation
PEEL PUMPS is authorized dealer of BBC Pumps in UK. This Italian Company based in Fossombrone Italy, was founded in 1959 and in 1997 was certified according to UNI EN ISO 9001 standards. BBC offers an extensive range of products and it has been distributed in UK for a number of years. We have a large stock of BBC Pumps available and we would be happy to provide you with the best solution for your application. This company design, manufacture and deal with efficient and reliable electric pumps that can be used also in the most severe applications.We offer 1-year guarantee and we can help you with the pumps use or installation.If you cannot see the product you are looking for listed below, don’t worry, our full catalogue is not on our website. Call us on 01706 558352 or contact us for a quote.
Based on 0 reviews
Be the first to review “P2BPTABBALKO -(85)”
Related products
- Customized Control Panels
P2BPTABAKHOL- (102)
P2BPTABAKHOL (102) – Designed for the control and running of a 400V three phase pump up to 18 Amp. Offering protection against dry running and motor overload. Pre-wired for Klixon, Water-in-Oil Probe and Hour Counter. Typically used with three float switches for Stop, Start and High Level Alarm.
SKU: n/a - Customized Control Panels
P2BPTA2BBALKO-(86)
P2BPTA2BBALKO (86) – Designed for the control and running of two 400V three phase pumps up to 50 Amp. Offering protection against dry running and motor overload. Pre-wired for Klixons and Water-in-Oil Probes. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a - Customized Control Panels
P2BPTACP- (53)
P2BPTACP (53) – Designed for the control and running of a 400V 3-phase pump, with 15 minute increment 24 hour timer. Offering protection against dry running and motor overload. Suitable for pumps with Nominal running Amps from 1.2 to 13. Typically used with three float switches for Stop, Start and High Level Alarm
SKU: n/a - Customized Control Panels
QMBT BOX- 15
QMBT BOX-15 Designed for the control of 230/1/50 pumps in clean water applications such as boreholes, wells and sumps; offering protection against dry running and motor overload. Five models cover motor sizes up to a nominal 1.5kW, min 2.4 to max 12 Amps.
SKU: n/a - Customized Control Panels
P2BPAGFP -(59)
P2BPAGFP (59) – Designed for the control and running of a 230V single phase pump, offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 2.5 to 13. Typically used with three float switches for Stop, Start and High Level Alarm.
SKU: n/a
There are no reviews yet.