No products in the basket.
Customized Control Panels
P2BPTA2BBALKO-(86)
P2BPTA2BBALKO (86) – Designed for the control and running of two 400V three phase pumps up to 50 Amp. Offering protection against dry running and motor overload. Pre-wired for Klixons and Water-in-Oil Probes. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
£1,697.90
Application Features Of P2BPTA2BBALKO-(86)
– Sheet steel IP55 enclosure with triple hinge to left hand side and double locks to right.
– 4 x wall mounting brackets.
LID:
– Yellow Light = Mains On.
– Green Lights = Pumps running.
– Red Lights = Motor failure.
– Lockable Door Interlocking Isolator: Isolates power supply when lid is open.
– Two Hand-Off-Auto Switches.
– High powered IP65 Siren alarm.
– Alarm on/off switch.
INTERNALS:
– 100VA Transformer: To reduce 400V supply to 24Vac for level control safety.
– Plug-In Relay: For level controls.
– Pre-wired with Klixon relays.
– Pre-wired with water in oil probe relays.
– Two Contactors with Motor Overload: Manual setting for pump running Amps.
– Will stop pump when set value is exceeded.
– Fuses: Fuse holders with HRC fuses on mains and auxiliary circuits.
Based on 0 reviews
Be the first to review “P2BPTA2BBALKO-(86)”
Related products
- Customized Control Panels
P2BPTAKHL-(126)
P2BPTAKHL (126) – Designed for the control and running of a 400V 3-phase pump, offering protection against dry running, motor overload and pre-wired for Klixon. Hour counter included. Suitable for submersible pumps with Nominal running Amps from 1.2 to 13. Typically used with three float switches for Stop, Start and High Level Alarm
SKU: n/a - Customized Control Panels
P2BPA2GNASHL -(112)
P2BPA2GNASHL (112) – Designed for the control and running of two Gnasher 230V grinder pumps with Start/Run capacitors. Offering protection against dry running and motor overload. Suitable for any of the six Gnasher models. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a - Customized Control Panels
P2BPTA2KHL- (92)
P2BPTA2KHL (92) – Designed for the control of two 400V 3-phase pumps, offering protection against dry running, motor overload and pre-wired for Klixon. Hour counters included. Suitable for pumps with Nominal running Amps 1.2 to 13. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm
SKU: n/a - Customized Control Panels, Pumps Control Panels
QMBT BOX-05
QMBT BOX-05 Designed for the control of 230/1/50 pumps in clean water applications such as boreholes, wells and sumps; offering protection against dry running and motor overload. Five models cover motor sizes up to a nominal 1.5kW, min 2.4 to max 12 Amps.
SKU: n/a - Customized Control Panels
P2BPAGNASHL-(113)
P2BPAGNASHL (113) – Designed for the control and running of a Gnasher 230V grinder pump with Start/Run capacitors. Offering protection against dry running and motor overload. Suitable for any of the six Gnasher models. Typically used with three float switches for Stop, Start and High Level Alarm.
SKU: n/a
There are no reviews yet.