No products in the basket.
Shop
Showing 436–450 of 523 resultsSorted by latest
- Franklin Subtronic SC, Pumps Control Panels
Franklin ST150PSC Single Phase Motor Protector Control Boxes
Franklin Subtronic SC, Pumps Control PanelsFranklin ST150PSC Single Phase Motor Protector Control Boxes
The single-phase PSC motor has been electrically optimized to offer a reliable pump starting over a wide range of incoming voltages. It should ideally be combined to the Franklin Electric SubStart/SubTronicSC control boxes for maximum system performance, protection and warranty.
SKU: ST150PSC - Franklin Subtronic SC, Pumps Control Panels
Franklin ST075PSC Single Phase Motor Protector Control Boxes
Franklin Subtronic SC, Pumps Control PanelsFranklin ST075PSC Single Phase Motor Protector Control Boxes
The single-phase PSC motor has been electrically optimized to offer a reliable pump starting over a wide range of incoming voltages. It should ideally be combined to the Franklin Electric SubStart/SubTronicSC control boxes for maximum system performance, protection and warranty.
SKU: ST075PSC - Franklin Subtronic SC, Pumps Control Panels
Franklin ST055PSC Single Phase Pump Control Boxes
The single-phase PSC motor has been electrically optimized to offer a reliable pump starting over a wide range of incoming voltages. It should ideally be combined to the Franklin Electric SubStart/SubTronicSC control boxes for maximum system performance, protection and warranty.
SKU: ST055PSC - Pump Accessories
ZDS Re-start & Go Pressure Control
The ‘Re-start and Go’ pressure control is an electronic device for direct start and protection of the pump against dry running. It keeps a constant working flow, which is thanks to the inner sensor and start up adjustable pressure switch. The pressure or the water movement decreasing results in the motor starting.
SKU: Re-Start - Pump Accessories
Conductance Probes with cables
ESU conductance level probes are most commonly used for automated pump control systems, therefore the pump knows when to come on and knock off due to resistance passing through the liquid to each of the probes at different heights. Designed primarily for borehole and clean well applications, these simple level probes are supplied with a choice of 15m, 30m, 35m, 50m or 100m PVC cables.
SKU: ESU with Cable - Conductance Probes
Conductance Probe ESU – 35M CABLE
ESU conductance level probes are most commonly used for automated pump control systems, therefore the pump knows when to come on and knock off due to resistance passing through the liquid to each of the probes at different heights. Designed primarily for borehole and clean well applications, these simple level probes are supplied with a choice of 15m, 30m, 35m, 50m or 100m PVC cables.
SKU: n/a - Irrigation Pumps, Pressure Boosting Pumps
Ebara JEX Self Priming Pumps
The Ebara JEX self-priminh electric pumps in AISI 304 Stainless Steel. The JEX pump is ideal for the supply of drinking water, domestic pressure boosting, small-scale garden irrigation, emptying reservoirs and swimming pools also moving clean water in general. This pump is practical and light in weight so therefore is easy to transport.
SKU: JEX Self Priming Pump - Drainage Pumps
SEALAND YACHT MAXI Drainer 12/24V
The bilge pumps of the series “YACHT” are entirely manufactured in special crash,rust and hydrocarbons proof polypropylene.Very easy to be cleaned and installed, this pump is supplied with 1 meter cable, fastening bottom cover and instruction manual for correct use.
SKU: n/a - Sewage Pumps
Maxi HN Freestanding Sewage Pump
The Maxi HN single channel impeller for 65mm solids handling. The 230v and 400v Maxi HN submersible is designed for heavy duty waste water and sewage applications, with pumped media containing solids in suspension up to 65mm diameter and temperatures of up to 40 Celsius. It features a single channel impeller designed for high hydraulic efficiency mounted on a reduced length shaft.
SKU: Maxi HN - Multistage Pumps, Water Pumps
BBC CMO 4 / 110 – 230V Multistage pump
Suction body and outlet Mechanical cast iron EN GJL-200 Pump casing, tie rods, bolts and nuts Stainless steel AISI304 Shaft Stainless steel AISI420 Impellers Stainless steel AISI304 Diffusers Polymer reinforced with fibre-glass Mechanical seal Graphite and ceramics
SKU: BBCCMO4 - Self-Priming Pumps
TELLARINI ENM40 230V Strong Self Priming Pump
Tellarini ENM40-230V Bronze Liquid Ring Transfer Self priming liquid ring transfer pumps, suitable for a wide range of clean liquids duties such as water, seawater, diesel etc. Available in 110/230/400V with reverse flow switch facility. Six sizes in the range handle Heads to 48m and flows to 250 l/m.
SKU: n/a - Cables, Franklin single phase motors
35m H07RNF Cable 1.5mm Franklin Fitting
Franklin Motors A range high quality 4″ motors for borehole pump applications.This range of high quality 400/3/50 stainless steel submersible motors, has been designed specifically for borehole pump and similar applications. 230V up to 2.2kW c/w starter panels. 400V from 0.55 to 5.5kW. Also a selection of cable materials such as EPR, H07RN-F and H07BQ-F with Franklin plugs, in lengths from 1.5m to 90m.
SKU: H07RNFCable - Self-Priming Pumps
Tellarini Ent30 400v
TELLARINI ENT30-400V Bronze Liquid Ring Transfer Self priming liquid ring transfer pumps, suitable for a wide range of clean liquids duties such as water, seawater, diesel etc. Available in 110/230/400V with reverse flow switch facility. Six sizes in the range handle Heads to 48m and flows to 250 l/m.
SKU: n/a - Conductance Probes
ESU – 60M CABLE
ESU conductance level probes are most commonly used for automated pump control systems, therefore the pump knows when to come on and knock off due to resistance passing through the liquid to each of the probes at different heights. Designed primarily for borehole and clean well applications, these simple level probes are supplied with a choice of 15m, 30m, 35m, 50m or 100m PVC cables.
SKU: n/a
