No products in the basket.
Shop
Showing 496–510 of 524 resultsSorted by latest
- Customized Control Panels
P2BPTA2KHL- (92)
P2BPTA2KHL (92) – Designed for the control of two 400V 3-phase pumps, offering protection against dry running, motor overload and pre-wired for Klixon. Hour counters included. Suitable for pumps with Nominal running Amps 1.2 to 13. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm
SKU: n/a - Customized Control Panels
P2BPTAKHL-(126)
P2BPTAKHL (126) – Designed for the control and running of a 400V 3-phase pump, offering protection against dry running, motor overload and pre-wired for Klixon. Hour counter included. Suitable for submersible pumps with Nominal running Amps from 1.2 to 13. Typically used with three float switches for Stop, Start and High Level Alarm
SKU: n/a - Customized Control Panels
P2BPA2L-(69)
P2BPA2L (69) – Designed for the control and running of a two 230V single phase pumps, offering protection against dry running and motor overload. Suitable for submersible pumps with Nominal running Amps from 2.5 to 13. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a - Jet Pumps, Self-Priming Pumps
TELLARINI JIM/T 8-230/400V
Tellarini Series JIM/JIT Jet Pumps Self priming stainless Jet pumps in 230/400V, suitable for a wide range of clean water transfer duties up to 60°C. Pump body in AISI 304. Four models in the range have motor sizes from 0.37 to 0.90kW, offering Heads to 45m and flows to 90 l/m.
SKU: n/a - Self-Priming Pumps
TELLARINI BS 50
Tellarini BS Series Hydraulic Drive Liquid Ring Transfer Bronze or Stainless self priming liquid ring transfer pumps, suitable for a wide range of clean liquid and corrosive duties. Flanged for connection to Group 2 hydraulic motors. Available in three sizes, various RPMs supply Heads to 30m and flows to 360 l/m.
SKU: n/a - Self-Priming Pumps
TELLARINI ALBS 40
These pumps have the same hydraulic performances of series AL with bearing and pulley, but they are flanged for connection to hydraulic motors group 2 version B03 (german standard).They are ideal for installation on board of machines equipped with a hydraulic system.
SKU: TellariniALBS40 - Self-Priming Pumps
TELLARINI BS 30
Tellarini BS Series Hydraulic Drive Liquid Ring Transfer Bronze or Stainless self priming liquid ring transfer pumps, suitable for a wide range of clean liquid and corrosive duties. Flanged for connection to Group 2 hydraulic motors. Available in three sizes, various RPMs supply Heads to 30m and flows to 360 l/m.
SKU: n/a - Self-Priming Pumps
TELLARINI l50
Tellarini I Series Pulley Drive Bronze Liquid Ring Transfer Self priming liquid ring transfer pumps, suitable for a wide range of clean liquid duties such as water, seawater, diesel etc. Reverse flow capabilty. Available in five sizes, various RPMs supply Heads to 60m and flows to 340 l/m.Tellarini.
SKU: n/a - Self-Priming Pumps
TELLARINI l30
Tellarini I Series Pulley Drive Bronze Liquid Ring Transfer Self priming liquid ring transfer pumps, suitable for a wide range of clean liquid duties such as water, seawater, diesel etc. Reverse flow capabilty. Available in five sizes, various RPMs supply Heads to 60m and flows to 340 l/m.Tellarini.
SKU: n/a - Self-Priming Pumps
TELLARINI l25
Tellarini I Series Pulley Drive Bronze Liquid Ring Transfer Self priming liquid ring transfer pumps, suitable for a wide range of clean liquid duties such as water, seawater, diesel etc. Reverse flow capabilty. Available in five sizes, various RPMs supply Heads to 60m and flows to 340 l/m.Tellarini.
SKU: n/a - Self-Priming Pumps
TELLARINI l20
Tellarini I Series Pulley Drive Bronze Liquid Ring Transfer Self priming liquid ring transfer pumps, suitable for a wide range of clean liquid duties such as water, seawater, diesel etc. Reverse flow capabilty. Available in five sizes, various RPMs supply Heads to 60m and flows to 340 l/m.Tellarini
SKU: Tellarini I20 - Cables, Franklin single phase motors
90m Franklin H07BQ-F Cable
Franklin Motors A range high quality 4″ motors for borehole pump applications.This range of high quality 400/3/50 stainless steel submersible motors, has been designed specifically for borehole pump and similar applications. 230V up to 2.2kW c/w starter panels. 400V from 0.55 to 5.5kW. Also a selection of cable materials such as EPR, H07RN-F and H07BQ-F with Franklin plugs, in lengths from 1.5m to 90m.
SKU: n/a - Cables, Franklin single phase motors, Pump Accessories
50m Franklin H07BQ-F Cable
Franklin Motors A range high quality 4″ motors for borehole pump applications.This range of high quality 400/3/50 stainless steel submersible motors, has been designed specifically for borehole pump and similar applications. 230V up to 2.2kW c/w starter panels. 400V from 0.55 to 5.5kW. Also a selection of cable materials such as EPR, H07RN-F and H07BQ-F with Franklin plugs, in lengths from 1.5m to 90m.
SKU: n/a - Cables, Franklin single phase motors
35m Franklin H07BQ-F Cable
Franklin Motors A range high quality 4″ motors for borehole pump applications.This range of high quality 400/3/50 stainless steel submersible motors, has been designed specifically for borehole pump and similar applications. 230V up to 2.2kW c/w starter panels. 400V from 0.55 to 5.5kW. Also a selection of cable materials such as EPR, H07RN-F and H07BQ-F with Franklin plugs, in lengths from 1.5m to 90m.
SKU: n/a - Cables, Franklin single phase motors
90m H07RNF Cable 1.5mm2/Franklin Fitting
Franklin Motors A range high quality 4″ motors for borehole pump applications.This range of high quality 400/3/50 stainless steel submersible motors, has been designed specifically for borehole pump and similar applications. 230V up to 2.2kW c/w starter panels. 400V from 0.55 to 5.5kW. Also a selection of cable materials such as EPR, H07RN-F and H07BQ-F with Franklin plugs, in lengths from 1.5m to 90m.
SKU: n/a
