No products in the basket.
Shop
Showing 106–120 of 523 resultsSorted by latest
- Franklin Subtronic SC, Pumps Control Panels
Franklin ST037PSC Control Box
The single-phase PSC motor has been electrically optimized to offer a reliable pump starting over a wide range of incoming voltages. It should ideally be combined to the Franklin Electric SubStart/SubTronicSC control boxes for maximum system performance, protection and warranty.
SKU: ST037PSC - Self-Priming Pumps
TELLARINI AL24/40-24V
Tellarini AL 12/24V Stainless Liquid Ring Transfer Self priming liquid ring transfer pumps, suitable for a wide range of clean liquids and corrosive duties. Maximum liquid density to 1.1g/cm³. The AL series, entirely made of stainless steel AISI 316, is particularly suited for corrosive liquids (chemical agents, fertilizing fluids, sea water) and food fluids (milk, wine, oil, fruit juices).
SKU: n/a - Franklin single phase motors
Franklin Motor – 230V-2.2KW with control box
Franklin Motors A range high quality 4″ motors for borehole pump applications.This range of high quality stainless steel submersible motors, has been designed specifically for borehole pump and similar applications. 230V up to 2.2kW c/w starter panels.
SKU: n/a - Electroil Archimede, Pump Accessories, Water Pump Inverters
Archimede Inverter IMMP 1.1W
The inverter type Archimede IMMP (single-phase input/single-phase output) are the easiest and the handiest inverters present on the market for this category of pumps. Electroil Inverter used for submersible pumps.We sell Electroil Archimede Inverters.
SKU: Archimede IMMP 1.1W - Jet Pumps, Self-Priming Pumps
TELLARINI ECC12JET – 12V
Strands ECC JET series self-priming water pumps. For suction and transfer of drinking or clean water from the tank, as well as air dissolved in the liquid, if any. AISI 304 stainless steel body and shaft. 12 or 24 Volt DC motor with terminal box, IP23 protection. Self-priming to a depth of 8 meters. Maximum 60 ºC liquid transfer can be done. Maximum working pressure 6 bar.
SKU: n/a - Multistage Pumps
Semisom CMO 5/70 – 230V
Suction body and outlet Mechanical cast iron EN GJL-200 Pump casing, tie rods, bolts and nuts Stainless steel AISI304 Shaft Stainless steel AISI420 Impellers Stainless steel AISI304 Diffusers Polymer reinforced with fibre-glass Mechanical seal Graphite and ceramics
SKU: n/a - Multistage Pumps
CMO 3/70 – 230V
Suction body and outlet Mechanical cast iron EN GJL-200 Pump casing, tie rods, bolts and nuts Stainless steel AISI304 Shaft Stainless steel AISI420 Impellers Stainless steel AISI304 Diffusers Polymer reinforced with fibre-glass Mechanical seal Graphite and ceramics
SKU: n/a - Self-Priming Pumps
TELLARINI ALT25 – 400V
TELLARINI ALT25 – 400V Stainless Liquid Ring Transfer Self priming liquid ring transfer pumps, suitable for a wide range of clean liquids and corrosive duties. Maximum liquid density to 1.1g/cm³.The AL series, entirely made of stainless steel AISI 316, is particularly suited for corrosive liquids (chemical agents, fertilizing fluids, sea water) and food fluids (milk, wine, oil, fruit juices).
SKU: n/a - Self-Priming Pumps
TELLARINI ALT20 – 400V
TELLARINI ALT20-400V Stainless Liquid Ring Transfer Self priming liquid ring transfer pumps, suitable for a wide range of clean liquids and corrosive duties. Maximum liquid density to 1.1g/cm³.The AL series, entirely made of stainless steel AISI 316, is particularly suited for corrosive liquids (chemical agents, fertilizing fluids, sea water) and food fluids (milk, wine, oil, fruit juices).
SKU: n/a - Jet Pumps, Self-Priming Pumps
TELLARINI GAEM 5 – 230V
Tellarini GAEM Jet Pumps with Electronic Pressure Controller. 230V Stainless steel jet pumps with Brio 2000-M automatic pressure controller.Clean water duties from 10 to 60 l/m. Max Head 40m.The GAEM system comprises of a stainless steel Jet pump and a Brio 2000-M automatic pump controller.
SKU: n/a - Customized Control Panels
P2BPA2NCP – (107)
P2BPA2NCP (107) – Designed for the control and running of two 230V internal capacitor pumps, offering protection against dry running and motor overload. Suitable for pumps with Nominal running Amps from 2.5 to 13. Typically used with four float switches for Stop, Alternating Duty, Duty/Assist and High Level Alarm.
SKU: n/a
